Process Equipments Division

Product Details:

Features:

• HEPA filtration
• Facilitate the isolation of a product or process while providing the required condition for a sterile / aseptic environment
• Provides a comprehensive range of personnel and product protection in addition to protection for the surrounding work areas and environment

The Technetium Dispensing Isolator is designed to provide safe, controlled, and sterile environment for elution and dispensing of Technetium-radiolabeled pharmaceuticals. It is configured to operate at a negative pressure in a single pass airflow. It provides a comprehensive personnel and product protection.

Personnel protection is achieved by adequate shielding of the generator as well as the whole workstation. The air of each enclosure is provided with HEPA filters with MPPS of 99.997% providing ISO Class 5 (Grade A) environment to ensure product protection.

Constructed with powder-coated electro-galvanized steel exteriors and 316L stainless steel interiors, the Technetium Dispensing Isolator has complete compliance to PIC/s and EU cGMP standards.

It consists of 3 parts: the Elution Chamber, Process Chamber, and Pass-through Chamber. This isolator is also available in powder-coated electro-galvanized steel.

Features:

• Each module provides an EU GMP Grade A environment
• Radiation-proof acrylic glass and work zones with lead (Pb) equivalence of 3.25 mm
• Quiet, energy-efficient ECM fans auto adjust to compensate for filter blockage
• Modular and easily customizable with desired equipment integration inside the workstation
• Capable of carrying out Pressure Decay Test; pressure-tested to Class 3 as per ISO 10648-2 standards
• Generators are housed in a lead-shielded compartment with lift for easy handling
• Dose calibrator compartment set-up, console set-up on the front side
• Shielded waste compartment set-up
• Fully sealed and interlocked doors on all chambers
• Equipped with SentinelTM Microprocessor Control System
• Audible and visual alarms
• UPS for emergency power backup for not less than 15 minutes

 

Product Details:

VacciXcell offers a state-of-the-art filling and stopper inserting machine for the filling of liquid biopharmaceutical products into vials, of a range of volumes.

Features:

• Choice of in-line or stand-alone equipment
• Filling station with optional pre/post nitrogen flush
• Dual stopper inserting station
• Vial range: 2-100ml
• Output: up to 100 vials/min
• Optional: Statistical Check Weighing
• Quick Changeover: Change from 1 vial format to another takes less than 15 minutes
• Independent servo drives for all functions: cleaner and reduced maintenance requirements
• Can be easily integrated into an isolator or RABS

TideCell® cell harvesting system is a powerful and automated system for harvesting viable cells from 2L to 20L TideCell® bioreactors. Being a closed system, it is perfect for harvesting seed cells for scaling up without having to worry about contamination. The system is capable of harvesting up to 10¹¹ cells within 3 hours of operation

Product Details:

Designed for handling pharmaceutical ingredients.
Equipped with an ingress / egress transfer chamber system
Double HEPA filtration.

Product Details:

Consists of four compartments designed for product staging, filling and stopper of vials under inert, HEPA filtered environment.
Independent blower / baffle system
Filling isolator includes a scrubber box for removing unwanted odors.
Equipped with high capacity flow meters, pressure relief valves and multiple gas inlets for rapid purging with an inert gas.

Product Details:

Adaptable aseptic containment solution with user defined pressure and airflow regimes.

Premium handling of biopharmaceutical germ seed cells and aseptic cell processing. Premium solution for large volume sterility testing.

Esco's WDCI is elemental for handling New Chemical Entities, weighing, dispensing and containing potent compounds during sub-division and sampling processes.

Our largest range of standard inbuilt configurations allow users to operate for varying process and R&D needs.

Esco’s weigh & dispensing isolator is the ultimate platform for potent handling.

Product Details:

Esco General Processing Platform Isolator (GPPI) is a highly adaptable, unidirectional laminar airflow isolator that can be used for sterility testing or other processes that require an ISO Class 5 (Grade A) aseptic environment. The GPPI’s advanced control system allows the operator to select either positive or negative chamber pressure as well as single pass or recirculating airflow patterns.

These features, along with the ability to perform safe change procedures on the supply and return ULPA filters, make the GPPI a highly versatile isolator that can be used for potent or non-potent aseptic materials.

In addition, the Esco GPPI’s design offers over 20 standard options and configurations ensuring that Esco can provide a standard solution to fit your specific process and facility requirements. Should a standard option not fit your requirements Esco can offer customized solutions as well.

Product Details:

Fermentors & Process Vessels

• 2 ltrs. To 20,000 ltrs. Fermentors
• Autoclavable Laboratory Fermentors
• Insitu sterilisable Laboratory and pilot Fermentors.
• Fully Automated Systems with speed, Temp, pH, DO, Foam and Pressure Control with Automatic

Sterilisation and CIP.

• PLC based SCADA systems with independent or common control panels for multiple fermentors.
• Independent PID control options.
• Computer software for data acquisition and supervisory control.
• Customised Fermentors available for , Vaccines, Industrial Enzymes, Biofertilizer,

Anaerobic Cultures, Pro Biotics etc.

• DQ, IQ, OQ, PQ Avaiable.
• Over 400 Fermentors and Mixing Vessels Installed

Downstream processing equipments for MF, UF and RO with ceramic or polymeric membranes.

Utilities : Steam, Air and Chilled Water for Laboratory Fermentors.

Global Presence : Germany, Italy, Singapore, Srilanka etc.

Product Details:

Product Details: