Laboratory Equipments Division

Product Details:

Muffle furnaces are the right choice for daily laboratory use. Nabertherm Muffle Furnace stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge. Tmax 1100°C-1400°C

Product Details:

Ashing furnaces are designed for processes in which larger sample quantities have to be incinerated. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Fields of application are ashing of food, thermal cleaning of injection molding tools, determination of annealing loss, debinding of ceramic products, e.g. after additive production. Tmax 1100°C

Product Details:

Weighing Furnace with integrated precision scale and software, is designed for combustion loss determination in the laboratory when analyzing sludges. The difference between the initial total mass and the combustion residue is the combustion loss. During the process, the software included records both the temperature and the weight loss. Tmax 1100°C, 1200°C

Product Details:

Tube Furnace with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price to performance ratio. Working tube is part of the furnace heating which has the advantage that the furnaces achieve very high heat-up rates. Tmax 1100°C-1800°C

Product Details:

Steelco offers a complete range of reliable washer disinfectors and automations focused on high cleaning results and operator safety. Steelco Laboratory Glass Washers are at the forefront of knowledge and research, guaranteeing the user tested and consistently efficient washing results.

Product Details:

Esco CelCulture® - World Class CO2 incubators from Esco with the technologies and compliance to prove it. Precise parameter control, robust contamination control with ULPA filtration system and 90°C moist heat decon. cycle, direct heat & air jacket design with 8 heaters grouped into 3 zones, gentle yet effective forced convection, intuitive interfaces, intelligent data and event logger with 16MB built-in flash memory, all supported by Esco's solutions - based sales and service representatives worldwide.
Key Benefits:

• ULPA filtration system
• 90^oC moist heat decontamination cycle, validated by HPA UK
• Precise temperature and gas control
• Cost effective

Product Details:

Specifications:

• High Efficiency Particulate Arrestation combined with Microbial Destruction. (HEPA-MD )
• Choice of two sizes with airflow rates up to 2000 m3/h – 1117 cfm.
• Mobile and flexible solution for securing all infectious risk areas.
• Exceptional maneuverability and intrinsically safe
• Easy to use, small footprint, easy installation, minimal servicing, quiet operation and eco friendly.
• No filter, no gases, no chemicals, no UV light used.
• Designed for use with critical care patients
• Can reach ISO6 and B5 (dependent on existing conditions)

Product Details:

Positioned as micro centrifuge, M22 and refrigerated M22R stand out with excellent feature and versatility. M22 and M22R have a capacity of up to 44 x 1.5/2.0ml and can accommodate 12 x 5ml reaction tube or 4 x 8-pcr strips per run. With hematocrit rotor, it can accommodate 24 x capillaries per run for the determination of the hematocrit value.

It is designed with compact size to save space in the lab and with low noise performance that is preferred in any working area. The powerful refrigeration system of M22R keeps samples at temperature for as low as 4^OC during a continuous run at 21380 x g

Product Details:

Owing to purpose specific construction and long functional life, our Plant growth Chambers are mostly preferred by various clients. Our devices are available in various technical specifications and widely used in various laboratories. Besides, these are acclaimed for robustness and user friendly applications.

Features:

• User friendly
• Consistency
• Long functional life

Additional Information:

• Item Code: GC1000

Product Details:

The Esco Cytoculture Cytotoxic Safety Cabinet is the premium solution for cytotoxic/antineoplastic drug processing, providing the highest level of patient, pharmacist and environmental protection. This revolutionary product builds on Esco’s experience of more than 20 years as a global leader in biological safety containment technology.

The unique demands of handling and preparing cytotoxic drugs for use in chemotherapy require a specialized cabinet. As cytotoxic drugs cannot be inactivated by chemical decontamination, Class II biosafety cabinets should not be used. With this in mind, Esco has developed a highly specialized range of cabinets designed especially for handling these potentially dangerous drugs.

Key Benefits:

• Safe filter changing
• Safer dual exhaust filters
• HPA certified to EN 12469

Product Details:

Some biological samples and biopharmaceutical products require storage at very low temperatures, lower than those provided by regular laboratory freezers. VacciXcell's solution to this is the Lexicon® II Ultra-Low Temperature Freezer, which can operate stably at a temperature of -80oC.

Product Details:

The Oribult™ Benchtop Incubator Shaker offers precise temperature control and maintenance to provide your cells with the optimum temperature conditions throughout the cell culture duration. The force convection ventilation design of this model ensures consistent and stable temperature. Precise programmable microprocessor extend versatilities through controllable time, speed and temperature.

Flexibility and Versatility:

• Apt to fit any application required for your operation.
• Offers multiple choice of accessories which allow to customize and meet the appropriate application.
• Two types of orbit (19 mm and 25 mm) that meets different application.
• Gassing manifold function add versatility for aerobic and anaerobic cultivation.

 

User-Friendly Control System:

• SmarTouch™: Large 5.7' intuitive touchscreen clearly displays every parameter and status of the shaker at a glance.
• Easy-to-use design enables to set parameter precisely.
• Historical settings can easily track and review from the touchscreen.
• Voyager® - coordinated with a software kit that remotely monitor and control the shakers conveniently through computer.
• Audible and visible alarm every end run.

Product Details:

For over 40 years CastelMAC S.p.A. has been a world leader in commercial refrigeration thanks to its extensive know-how of refrigeration processes and to its wide range of high quality products.

Icematic ice-makers are a result of 40 years of experience and achievements in engineering, designing and production

 

Features:

• Good Performance.
• Reliability
• Easy installation system
• Capacity to produce 85 kg to 1000 kg per day of flake ice
• Microprocessor controlled with advanced control and safety functions
• Stainless steel construction
• Over 1000 Ice flakers installed
• Storage bins: Perfectly insulated and specially designed to fit the high production ice-makers (modular and flake ice machines)

Product Details:

Optimum Control Features

• Functional LCD (resolution 0.1℃) keypad type display: Designed to simplify operation with a VFD touch screen type display. (HL / HS / HH Models)
  • Self-diagnostic function identifies equipment errors.
  • Recognizable and convenient keypad.
  • Clear and easy-to-use LCD display.
• Bright LED water level indicator.
• Pump pressure gauge.
• Run, compressing, pumping visual indicator.
• Eco-friendly R-404A or R507 refrigerant.
• Hot gas by-pass. (only HL Models)
• Integrated heaters with high temp stability. (only for HH Models)

Constructional Features

• High quality #304 grade stainless inner chamber and dirt repellent powder coated external surface.
• Stainless steel submerged parts are resistant to corrosion against all usual bath fluids.
• Pump pressure can be controlled using a bypass function. (only for HX-H type)
• Removable gridded vent for reducing condenser contamination and to facil-itate cleanliness.
• Wheels allow for easy mobility.
• Computer Interface. (only for HS / HH Models)
• Warning alarm/monitoring system.
  • Over temperature.
  • Lack of bath solutions.
• Pressure gauge comes standard with recirculating units to provide fluid system diagnostics at a glance and for observing the pump pressure.

 

Product Details:

Complete portability from lab to lab.
Easy to load large bulky equipment.
Units can be "coupled" together for multiple user operations.
Excellent low humidity characteristics.
White ambidextrous Hypalon gloves for superior chemical and U.V. resistance.
Complete safety for transferring anaerobic field samples.

Product Details:

T1000 and refrigerated model T100R stand out among the same level products with their versatility, running features and easy handling. It can act as different model to meet all your application needs: micro centrifuge for DNA precipitations, high-capacity and low-to-high speed general-purpose centrifuge for cell application. T1000 and T1000R have a variety of rotors, with capacity up to 6 x 250ml conical tubes or 2 x 3 microtiter plates, and centrifugal forces up to 24321 x g.

 

Key Benefits:

• Maintenance-free brushless motor.
• Diverse choices of rotors.
• Exceptional capability in compact dimensions, maximizes workspace.
• Powerful combination or motor and rotor, results in high speed up to 16000rpm/24321 x g.
• The refrigerated system not only have a cooling function but also have a heating function. The temperature range is from -20^OC to 40^OC.

Product Details:

Safety Features

• Automatic power cut-off in case of overcurrent:
• User settable operation mode after power interruption:
• Either Automatic Run or Manual Run.(except for SK, SKF models)
• Special acceleration and deceleration circuitry (except for RS, CPS, CMS, CWS and CRS models):
  
  • Stopping the shaking table always at the center using a position senser
  • Smooth start and smooth stop preventing chemical spills from flasks or test tubes
  • Automatic adjusted shaking speed when load imbalance or unusual vibration is detected by the sensor.(Only SKC models)

Optimum Control Features

• Microprocessor PID control
• Wide speed range suitable for most applications
• Self-diagnostic function identifying errors (audible and visible alarms) and also guiding troubleshooting

Diverse shaking features:

• Dual shaking actions: orbital and reciprocating (only SK models)
• Multi-function shaking system:
  
  • Time
  • Forward & Backward, Pause

• Intuitive, splash-proof and easy to clean control panel
• Bright LED displays with touch-sensitive keypad (for SK and SKF models)
• Vivid and colorful vacuum fluorescent display (VFD) with touch-sensitive buttons and a dial knob (for SKC, CMS, CWS and CRS models)
• Audible alarm at the end of each shaking session (for RS models)

Constructional Features

• Low-profile design minimizing vibration or sliding caused by the high speed shaking motion
• Smooth, quiet, and uniform shaking motion thanks to the maintenance-free BLDC motor which also supports high-speed applications and heavy workloads(without SKC models)
• Innovative and durable triple-cam shaking mechanism(for SKC models only)
• Dirt-repellent external surface with power coating
• DD(Direct drive) motor allows the shaker to hold heavy loads, is quiet, high rpm, and durable. (SKC models)
• Wide range of accessories

Product Details:

Features:

• Designed specifically for use in hazardous situation where materials to be weighed must be contained. Four purging gas valves (two on the transfer chambers and two on the main chambers).
• Beneficial when working with toxic substances, asbestos fibers, sewage residue, and harmful liquid vapors.
• Access doors if transfer chambers are not desired.

Product Details:

We are identified as one of the established traders of a comprehensive array ofCentrifuges, which includes complete range of Refrigerated and Non Refrigerated Centrifuges. Supplemented with microprocessor controlled large LCD display, these devices offer excellent visibility of different readings. Acknowledged for is high speed, optimum performance, accuracy in results, durability and easy application, these can also be offered in custom designs to meet the exact needs and demands of the clients. Available in various models such as Small Centrifuges, Micro Centrifuges, Bench top, High Speed, Universal Centrifuges, High Volume, High Speed Centrifuges, our range comes with following.

 

Specifications:

• Microprocessor controlled & large LCD display
• Autoclavable Rotors
• Automatic Lid Lock / Rotor recognition
• Self Diagnostics and Alarm functions
• Rotor imbalance alarm
• Angle Rotors, Swing out Rotors, Microplate Rotors, Haemetocrit Rotors

Product Details:

Optimum Control Features:

• Microprocessor PID control.
• Simple calibration and auto-tuning functions.

 

Constructional Features:

• High-quality 304 grade stainless steel chamber interior and dirt-repellent external surface with power coating.
• Perfectly sealed door gasket minimizing heat loss and fully insulated chambers. Adjustable and electropolished stainless steel wire shelves allowing efficient air-flow and easy cleaning.
  (exept for SI and IS Models)

 

Hybridization Oven:

• Open door alert and humidity warning alert with Audible and visible alarms.
• Microprocessor PID control.
• Simple calibration and auto-tuning functions.
• Ease-of-operation provided by a bright VFD, responsive touch buttons, and a jog dial.
• Memory function of programmed protocols allowing relevant parameters of each protocol step to be stored. (such as temperature, rocking speed, time, etc)

Product Details:

ORBITEK ® Stackable Shakers has optimal foot print with robust structure for stable operation at full stack.

VERSATILITY

• Stackable shakers with large holding capacity can be stacked upto 3 vertical high.
• Inner chamber tall enough to support 5 Ltr flasks.
• Data logging facility for temperature and speed.
• Gassing manifold for purging Co2 / N2 available as optional.
• Programming of speed and temperature with facility for simulating day/night settings, UV-C de-contamination, - LE4676-H.

CONVENIENCE

• Swing down front open door with gas spring dampers for convenient operation.
• Top platform height is under 1.5 m from ground, while 3 stacked , enabling convenient accessibility .
• Wide front double glazed window for clear view of culture flasks
• Full length slide -out platform for easy accessibility during loading/unloading culture flasks.
• Touch screen operation with large colour LCD display screen for visual comfort.
  ( Model : LE 4676 H )
• Soft-key pad operation with bright LED display ( Model:LE 4676)
• Side mounted refrigeration unit for ease in serviceability without disturbing the stack assembly.
• All stainless steel inner chamber for easy cleaning and disinfection.
• Ergonomically designed slide out photosynthetic light bank –optional.
• Stationary trays along the depth of inner chamber for incubation needs.

RELIABILITY

• Brushless AC / Brushless DC drive
• High grade insulation for constant temperature maintenance.
• 300 rpm shaking speed even at full stack with minimal vibration
• Triple-eccentric counterbalanced Drive mechanism ,ensuring smooth running at full load and no load conditions.
• Temperature uniformity with minimum gradient for reliable growth results.
• Optional UV-C lamp for disinfection to avoid contamination
• Programmed acceleration and deceleration circuit for Gentle Start/Stop cycle to prevent spillages or cell shear .
• Audible & Visual alarm for Speed & temperature deviation.
• Residual Current Circuit Breaker (RCCB)for user safety
• Thermostat cut –off for temperature over shoot
• Emergency Stop switch

• Door sensor to stop the movement upon door opening.

Product Details:

Features & Specifications:

• 2 Ltrs. to 14 Ltrs. Fermentors.
• Autoclavable and sterizable Institute & Laboratory Fermentors.
• Fully Automated Systems with Speed, Temp, pH, DO, Foam and Pressure Control with Automatic Sterilisation and CIP.
• PLC based SCADA systems with independent or common control panels for multiple fermentors.
• Independent PID control options.
• CFR 21 part II compliant Computer software for data acquisition and supervisory control.
• Customised Fermentors available for , Vaccines, Industrial Enzymes,
• Biofertilizer, Anaerobic Cultures, Pro Biotics etc.
• DQ, IQ, OQ, PQ Available.
• Over 500 Fermentors and Mixing Vessels Installed.
• Downstream processing equipments for MF, UF and RO with ceramic or polymeric membrances.

Product Details:

ORBITEK ® open air shakers are typically designed to suit , researchers application demands in cultivating microbial, tissue cultures and cell cultures. The constant agitation with uniform amplitude provides the optimum oxygen transfer to the cultures, resulting in better and homogenous yield.

These lab scale open air shakers are available in 3 different variants to choose from. Based on clamp holding capacity and speed, ORBITEK ® open air shakers addresses the user scientists requirements in Life –Sciences.

Product Details:

Universal Tray – 420 x 420 mm
Compact shakers with high RPM

Product Details:

Steelco washers for life science applications are at the forefront of knowledge and research. The High efficiency systems are designed with the essence of ergonomy, safety, productivity, automation, high throughput, usability, reliability, traceability, allergene protection, operator safety, quality design, space, time, water, energy saving capabilities.

Features:

• Durable
• Robustness
• User-friendly      

Product Details:

Plas-Labs is the world leader in Acrylic Containment and lsolation Technology. Since 1967, Plas-Labs’ product line of glove boxes have been used in research laboratories all over the world. Plas-Labs Hypoxia Chamber Glove Box is the latest in CO Control, Oxygen Control and Temperature Controlled Containment System. Products include Glove Boxes, 2 Anaerobic Chambers, isolators, Environmental Controlled Chambers, Desiccators, PCR Chambers, Nitrogen Dry Boxes, Animals Care and Animals Research Products.

 

Features:

• Heavy gauge .375″ and .500″ thick transparent jeweled acrylic plastic.
• Closed cellular (One piece) Poron gasket.
• Unique “gasket guard” system to prevent gasket from taking a “set.”
• Nylon inlet and outlet gas nipples, hosw barb style, size 1/8″&1/4″ hose barbs.
• Greaseless Neoprene “O” ring.

Product Details:

US Models (steel housing, SUS tank)

• All parts are made of durable 304 stainless steel tanks, cover and powder coating steel housing.
• Maximum heater temperature is 70℃.
• Digital LED display using splash-proof keypads: timer (1 to 99 min), temperature monitor.
• High-frequency 40 kHz sound waves provide greater cleaning power and increased reliability.
• Multiple frequency on 3 stages for both gentle cleaning and intensive cleaning.

UC Models (ABS / PBT housing, SUS tank) US Models (steel housing, SUS tank)